LOAD CELL SHACKLE SWLS SWLST

Click here for PDF to print

Produced in capacities from 5 to 300 tonnes. The shackle body is manufactured of Galvanised alloy steel. The shackle pin (Nickel steel up to 35 tonnes, Alloy steel on larger capacities) is retained in the shackle body by means of a nut and split pin, and an anti-rotation device is incorporated in the pin to ensure correct alignment. The pin itself is through bored and strain gauges are internally resin bonded at both shear planes.

A close fitting tapered steel bobbin is included to ensure that the load is applied through the midline of the shackle pin. Load cell shackles are available in both cabled (SWLS) and radio telemetry (SWLST) versions. Up to 50 tonnes capacity accuracy is better than 0.5% F.S. over 50 tonnes accuracy is better than 1.0% F.S.

The range may be used with SWLPC(J) display or any instrument capable of accepting a 0 to 2 mV/volt output. Load cell shackles should not be selected for precision weighing or high accuracy load monitoring applications due to the practical difficulties associated with ensuring that the load is axially applied through the shackle.

OPTIONS

12 volt rechargeable battery Other shackle types (quote specification when ordering).
Alternative cable lengths (up to 200 metres).
Submersible verions (up to 100 metres depth). For non Telemetry units only.

FEATURES

Strain gauges fitted within the bore of the shackle pin for maximum protection.
Bow or Dee shackle to U.S. Federal specification RR-C-271D.
Protected IP65.
Glanded cable 0.5 metres with protective hose.
Extension cable (plug and socket ends) 10 metres.
Robust nylon reinforced plugs and sockets with locking rings.
Readily interface to SWLPC(J) display.