Designed primarily for the lifting and lowering of personnel, with or without additional loads, The winches feature two automatic brakes, a manual hand crank (in case of power failure), a design factor of safety in excess of 8, a rope to drum diameter ratio in excess of 20 and a spiral grooved drum core.
The range meets with the requirements of the certifying authorities and complies with current European health and safety requirements for the lifting and lowering of personnel.
Options
Upper and lower limit switches. Slack rope sensing device. Drum pressure roller (prevents slack rope on the drum). Increased or reduced rope capacity (alternative drum lengths). Alternative speeds (faster or slower). Load limiting device (cuts hoist function in overload condition). Remote control (fixed position or hand held pendant). Emergency stop. Certifying authority witness test. Radio remote emergency stop (enables man being lifted to stop the winch).
Features
Grooved drum. Marine paint system. Full material traceability on all load bearing parts (3.1.b.EN10204). Emergency hand crank. Self braking gearbox. Electric - IP56 TENV brake motor Hydraulic & Pneumatic - Automatic band brake. Hydraulic - Automatic brake motor. Pneumatic - Control valve on winch - Cable kickers.
Upper and lower limit switches.
